Run Jobs

• 1: Running Automated Tasks with a CronJob
• 2: Coarse Parallel Processing Using a Work Queue
• 3: Fine Parallel Processing Using a Work Queue
• 4: Indexed Job for Parallel Processing with Static Work Assignment
• 5: Parallel Processing using Expansions

1 - Running Automated Tasks with a CronJob

CronJobs was promoted to general availability in Kubernetes v1.21. If you are using an older version of Kubernetes, please refer to the documentation for the version of Kubernetes that you are using, so that you see accurate information. Older Kubernetes versions do not support the batch/v1 CronJob API.

You can use a CronJob to run Jobs on a time-based schedule. These automated jobs run like Cron tasks on a Linux or UNIX system.

Cron jobs are useful for creating periodic and recurring tasks, like running backups or sending emails. Cron jobs can also schedule individual tasks for a specific time, such as if you want to schedule a job for a low activity period.

Cron jobs have limitations and idiosyncrasies. For example, in certain circumstances, a single cron job can create multiple jobs. Therefore, jobs should be idempotent.

For more limitations, see CronJobs.

Before you begin

• You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

  • Katacoda
  • Play with Kubernetes

Creating a Cron Job

Cron jobs require a config file. This example cron job config .spec file prints the current time and a hello message every minute:

application/job/cronjob.yaml

apiVersion: batch/v1
kind: CronJob
metadata:
  name: hello
spec:
  schedule: "*/1 * * * *"
  jobTemplate:
    spec:
      template:
        spec:
          containers:
          - name: hello
            image: busybox
            imagePullPolicy: IfNotPresent
            command:
            - /bin/sh
            - -c
            - date; echo Hello from the Kubernetes cluster
          restartPolicy: OnFailure

Run the example CronJob by using this command:

kubectl create -f https://k8s.io/examples/application/job/cronjob.yaml

The output is similar to this:

cronjob.batch/hello created

After creating the cron job, get its status using this command:

kubectl get cronjob hello

The output is similar to this:

NAME    SCHEDULE      SUSPEND   ACTIVE   LAST SCHEDULE   AGE
hello   */1 * * * *   False     0        <none>          10s

As you can see from the results of the command, the cron job has not scheduled or run any jobs yet. Watch for the job to be created in around one minute:

kubectl get jobs --watch

The output is similar to this:

NAME               COMPLETIONS   DURATION   AGE
hello-4111706356   0/1                      0s
hello-4111706356   0/1           0s         0s
hello-4111706356   1/1           5s         5s

Now you've seen one running job scheduled by the "hello" cron job. You can stop watching the job and view the cron job again to see that it scheduled the job:

kubectl get cronjob hello

The output is similar to this:

NAME    SCHEDULE      SUSPEND   ACTIVE   LAST SCHEDULE   AGE
hello   */1 * * * *   False     0        50s             75s

You should see that the cron job hello successfully scheduled a job at the time specified in LAST SCHEDULE. There are currently 0 active jobs, meaning that the job has completed or failed.

Now, find the pods that the last scheduled job created and view the standard output of one of the pods.

# Replace "hello-4111706356" with the job name in your system
pods=$(kubectl get pods --selector=job-name=hello-4111706356 --output=jsonpath={.items[*].metadata.name})

Show pod log:

kubectl logs $pods

The output is similar to this:

Fri Feb 22 11:02:09 UTC 2019
Hello from the Kubernetes cluster

Deleting a Cron Job

When you don't need a cron job any more, delete it with kubectl delete cronjob <cronjob name>:

kubectl delete cronjob hello

Deleting the cron job removes all the jobs and pods it created and stops it from creating additional jobs. You can read more about removing jobs in garbage collection.

Writing a Cron Job Spec

As with all other Kubernetes configs, a cron job needs apiVersion, kind, and metadata fields. For general information about working with config files, see deploying applications, and using kubectl to manage resources documents.

A cron job config also needs a .spec section.

Schedule

The .spec.schedule is a required field of the .spec. It takes a Cron format string, such as 0 * * * * or @hourly, as schedule time of its jobs to be created and executed.

The format also includes extended "Vixie cron" step values. As explained in the FreeBSD manual:

Step values can be used in conjunction with ranges. Following a range with /<number> specifies skips of the number's value through the range. For example, 0-23/2 can be used in the hours field to specify command execution every other hour (the alternative in the V7 standard is 0,2,4,6,8,10,12,14,16,18,20,22). Steps are also permitted after an asterisk, so if you want to say "every two hours", just use */2.

Job Template

The .spec.jobTemplate is the template for the job, and it is required. It has exactly the same schema as a Job, except that it is nested and does not have an apiVersion or kind. For information about writing a job .spec, see Writing a Job Spec.

Starting Deadline

The .spec.startingDeadlineSeconds field is optional. It stands for the deadline in seconds for starting the job if it misses its scheduled time for any reason. After the deadline, the cron job does not start the job. Jobs that do not meet their deadline in this way count as failed jobs. If this field is not specified, the jobs have no deadline.

If the .spec.startingDeadlineSeconds field is set (not null), the CronJob controller measures the time between when a job is expected to be created and now. If the difference is higher than that limit, it will skip this execution.

For example, if it is set to 200, it allows a job to be created for up to 200 seconds after the actual schedule.

Concurrency Policy

The .spec.concurrencyPolicy field is also optional. It specifies how to treat concurrent executions of a job that is created by this cron job. The spec may specify only one of the following concurrency policies:

• Allow (default): The cron job allows concurrently running jobs
• Forbid: The cron job does not allow concurrent runs; if it is time for a new job run and the previous job run hasn't finished yet, the cron job skips the new job run
• Replace: If it is time for a new job run and the previous job run hasn't finished yet, the cron job replaces the currently running job run with a new job run

Note that concurrency policy only applies to the jobs created by the same cron job. If there are multiple cron jobs, their respective jobs are always allowed to run concurrently.

Suspend

The .spec.suspend field is also optional. If it is set to true, all subsequent executions are suspended. This setting does not apply to already started executions. Defaults to false.

Jobs History Limits

The .spec.successfulJobsHistoryLimit and .spec.failedJobsHistoryLimit fields are optional. These fields specify how many completed and failed jobs should be kept. By default, they are set to 3 and 1 respectively. Setting a limit to 0 corresponds to keeping none of the corresponding kind of jobs after they finish.

2 - Coarse Parallel Processing Using a Work Queue

In this example, we will run a Kubernetes Job with multiple parallel worker processes.

In this example, as each pod is created, it picks up one unit of work from a task queue, completes it, deletes it from the queue, and exits.

Here is an overview of the steps in this example:

1. Start a message queue service. In this example, we use RabbitMQ, but you could use another one. In practice you would set up a message queue service once and reuse it for many jobs.
2. Create a queue, and fill it with messages. Each message represents one task to be done. In this example, a message is an integer that we will do a lengthy computation on.
3. Start a Job that works on tasks from the queue. The Job starts several pods. Each pod takes one task from the message queue, processes it, and repeats until the end of the queue is reached.

Before you begin

Be familiar with the basic, non-parallel, use of Job.

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

• Katacoda
• Play with Kubernetes

Starting a message queue service

This example uses RabbitMQ, however, you can adapt the example to use another AMQP-type message service.

In practice you could set up a message queue service once in a cluster and reuse it for many jobs, as well as for long-running services.

Start RabbitMQ as follows:

kubectl create -f https://raw.githubusercontent.com/kubernetes/kubernetes/release-1.3/examples/celery-rabbitmq/rabbitmq-service.yaml

service "rabbitmq-service" created

kubectl create -f https://raw.githubusercontent.com/kubernetes/kubernetes/release-1.3/examples/celery-rabbitmq/rabbitmq-controller.yaml

replicationcontroller "rabbitmq-controller" created

We will only use the rabbitmq part from the celery-rabbitmq example.

Testing the message queue service

Now, we can experiment with accessing the message queue. We will create a temporary interactive pod, install some tools on it, and experiment with queues.

First create a temporary interactive Pod.

# Create a temporary interactive container
kubectl run -i --tty temp --image ubuntu:18.04

Waiting for pod default/temp-loe07 to be running, status is Pending, pod ready: false
... [ previous line repeats several times .. hit return when it stops ] ...

Note that your pod name and command prompt will be different.

Next install the amqp-tools so we can work with message queues.

# Install some tools
root@temp-loe07:/# apt-get update
.... [ lots of output ] ....
root@temp-loe07:/# apt-get install -y curl ca-certificates amqp-tools python dnsutils
.... [ lots of output ] ....

Later, we will make a docker image that includes these packages.

Next, we will check that we can discover the rabbitmq service:

# Note the rabbitmq-service has a DNS name, provided by Kubernetes:

root@temp-loe07:/# nslookup rabbitmq-service
Server:        10.0.0.10
Address:    10.0.0.10#53

Name:    rabbitmq-service.default.svc.cluster.local
Address: 10.0.147.152

# Your address will vary.

If Kube-DNS is not setup correctly, the previous step may not work for you. You can also find the service IP in an env var:

# env | grep RABBIT | grep HOST
RABBITMQ_SERVICE_SERVICE_HOST=10.0.147.152
# Your address will vary.

Next we will verify we can create a queue, and publish and consume messages.

# In the next line, rabbitmq-service is the hostname where the rabbitmq-service
# can be reached.  5672 is the standard port for rabbitmq.

root@temp-loe07:/# export BROKER_URL=amqp://guest:guest@rabbitmq-service:5672
# If you could not resolve "rabbitmq-service" in the previous step,
# then use this command instead:
# root@temp-loe07:/# BROKER_URL=amqp://guest:guest@$RABBITMQ_SERVICE_SERVICE_HOST:5672

# Now create a queue:

root@temp-loe07:/# /usr/bin/amqp-declare-queue --url=$BROKER_URL -q foo -d
foo

# Publish one message to it:

root@temp-loe07:/# /usr/bin/amqp-publish --url=$BROKER_URL -r foo -p -b Hello

# And get it back.

root@temp-loe07:/# /usr/bin/amqp-consume --url=$BROKER_URL -q foo -c 1 cat && echo
Hello
root@temp-loe07:/#

In the last command, the amqp-consume tool takes one message (-c 1) from the queue, and passes that message to the standard input of an arbitrary command. In this case, the program cat prints out the characters read from standard input, and the echo adds a carriage return so the example is readable.

Filling the Queue with tasks

Now let's fill the queue with some "tasks". In our example, our tasks are strings to be printed.

In a practice, the content of the messages might be:

• names of files to that need to be processed
• extra flags to the program
• ranges of keys in a database table
• configuration parameters to a simulation
• frame numbers of a scene to be rendered

In practice, if there is large data that is needed in a read-only mode by all pods of the Job, you will typically put that in a shared file system like NFS and mount that readonly on all the pods, or the program in the pod will natively read data from a cluster file system like HDFS.

For our example, we will create the queue and fill it using the amqp command line tools. In practice, you might write a program to fill the queue using an amqp client library.

/usr/bin/amqp-declare-queue --url=$BROKER_URL -q job1  -d
job1

for f in apple banana cherry date fig grape lemon melon
do
  /usr/bin/amqp-publish --url=$BROKER_URL -r job1 -p -b $f
done

So, we filled the queue with 8 messages.

Create an Image

Now we are ready to create an image that we will run as a job.

We will use the amqp-consume utility to read the message from the queue and run our actual program. Here is a very simple example program:

application/job/rabbitmq/worker.py

#!/usr/bin/env python

# Just prints standard out and sleeps for 10 seconds.
import sys
import time
print("Processing " + sys.stdin.readlines()[0])
time.sleep(10)

Give the script execution permission:

chmod +x worker.py

Now, build an image. If you are working in the source tree, then change directory to examples/job/work-queue-1. Otherwise, make a temporary directory, change to it, download the Dockerfile, and worker.py. In either case, build the image with this command:

docker build -t job-wq-1 .

For the Docker Hub, tag your app image with your username and push to the Hub with the below commands. Replace <username> with your Hub username.

docker tag job-wq-1 <username>/job-wq-1
docker push <username>/job-wq-1

If you are using Google Container Registry, tag your app image with your project ID, and push to GCR. Replace <project> with your project ID.

docker tag job-wq-1 gcr.io/<project>/job-wq-1
gcloud docker -- push gcr.io/<project>/job-wq-1

Defining a Job

Here is a job definition. You'll need to make a copy of the Job and edit the image to match the name you used, and call it ./job.yaml.

application/job/rabbitmq/job.yaml

apiVersion: batch/v1
kind: Job
metadata:
  name: job-wq-1
spec:
  completions: 8
  parallelism: 2
  template:
    metadata:
      name: job-wq-1
    spec:
      containers:
      - name: c
        image: gcr.io/<project>/job-wq-1
        env:
        - name: BROKER_URL
          value: amqp://guest:guest@rabbitmq-service:5672
        - name: QUEUE
          value: job1
      restartPolicy: OnFailure

In this example, each pod works on one item from the queue and then exits. So, the completion count of the Job corresponds to the number of work items done. So we set, .spec.completions: 8 for the example, since we put 8 items in the queue.

Running the Job

So, now run the Job:

kubectl apply -f ./job.yaml

Now wait a bit, then check on the job.

kubectl describe jobs/job-wq-1

Name:             job-wq-1
Namespace:        default
Selector:         controller-uid=41d75705-92df-11e7-b85e-fa163ee3c11f
Labels:           controller-uid=41d75705-92df-11e7-b85e-fa163ee3c11f
                  job-name=job-wq-1
Annotations:      <none>
Parallelism:      2
Completions:      8
Start Time:       Wed, 06 Sep 2017 16:42:02 +0800
Pods Statuses:    0 Running / 8 Succeeded / 0 Failed
Pod Template:
  Labels:       controller-uid=41d75705-92df-11e7-b85e-fa163ee3c11f
                job-name=job-wq-1
  Containers:
   c:
    Image:      gcr.io/causal-jigsaw-637/job-wq-1
    Port:
    Environment:
      BROKER_URL:       amqp://guest:guest@rabbitmq-service:5672
      QUEUE:            job1
    Mounts:             <none>
  Volumes:              <none>
Events:
  FirstSeen  LastSeen   Count    From    SubobjectPath    Type      Reason              Message
  ─────────  ────────   ─────    ────    ─────────────    ──────    ──────              ───────
  27s        27s        1        {job }                   Normal    SuccessfulCreate    Created pod: job-wq-1-hcobb
  27s        27s        1        {job }                   Normal    SuccessfulCreate    Created pod: job-wq-1-weytj
  27s        27s        1        {job }                   Normal    SuccessfulCreate    Created pod: job-wq-1-qaam5
  27s        27s        1        {job }                   Normal    SuccessfulCreate    Created pod: job-wq-1-b67sr
  26s        26s        1        {job }                   Normal    SuccessfulCreate    Created pod: job-wq-1-xe5hj
  15s        15s        1        {job }                   Normal    SuccessfulCreate    Created pod: job-wq-1-w2zqe
  14s        14s        1        {job }                   Normal    SuccessfulCreate    Created pod: job-wq-1-d6ppa
  14s        14s        1        {job }                   Normal    SuccessfulCreate    Created pod: job-wq-1-p17e0

All our pods succeeded. Yay.

Alternatives

This approach has the advantage that you do not need to modify your "worker" program to be aware that there is a work queue.

It does require that you run a message queue service. If running a queue service is inconvenient, you may want to consider one of the other job patterns.

This approach creates a pod for every work item. If your work items only take a few seconds, though, creating a Pod for every work item may add a lot of overhead. Consider another example, that executes multiple work items per Pod.

In this example, we use the amqp-consume utility to read the message from the queue and run our actual program. This has the advantage that you do not need to modify your program to be aware of the queue. A different example, shows how to communicate with the work queue using a client library.

Caveats

If the number of completions is set to less than the number of items in the queue, then not all items will be processed.

If the number of completions is set to more than the number of items in the queue, then the Job will not appear to be completed, even though all items in the queue have been processed. It will start additional pods which will block waiting for a message.

There is an unlikely race with this pattern. If the container is killed in between the time that the message is acknowledged by the amqp-consume command and the time that the container exits with success, or if the node crashes before the kubelet is able to post the success of the pod back to the api-server, then the Job will not appear to be complete, even though all items in the queue have been processed.

3 - Fine Parallel Processing Using a Work Queue

In this example, we will run a Kubernetes Job with multiple parallel worker processes in a given pod.

In this example, as each pod is created, it picks up one unit of work from a task queue, processes it, and repeats until the end of the queue is reached.

Here is an overview of the steps in this example:

1. Start a storage service to hold the work queue. In this example, we use Redis to store our work items. In the previous example, we used RabbitMQ. In this example, we use Redis and a custom work-queue client library because AMQP does not provide a good way for clients to detect when a finite-length work queue is empty. In practice you would set up a store such as Redis once and reuse it for the work queues of many jobs, and other things.
2. Create a queue, and fill it with messages. Each message represents one task to be done. In this example, a message is an integer that we will do a lengthy computation on.
3. Start a Job that works on tasks from the queue. The Job starts several pods. Each pod takes one task from the message queue, processes it, and repeats until the end of the queue is reached.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

• Katacoda
• Play with Kubernetes

Be familiar with the basic, non-parallel, use of Job.

Starting Redis

For this example, for simplicity, we will start a single instance of Redis. See the Redis Example for an example of deploying Redis scalably and redundantly.

You could also download the following files directly:

• redis-pod.yaml
• redis-service.yaml
• Dockerfile
• job.yaml
• rediswq.py
• worker.py

Filling the Queue with tasks

Now let's fill the queue with some "tasks". In our example, our tasks are strings to be printed.

Start a temporary interactive pod for running the Redis CLI.

kubectl run -i --tty temp --image redis --command "/bin/sh"
Waiting for pod default/redis2-c7h78 to be running, status is Pending, pod ready: false
Hit enter for command prompt

Now hit enter, start the redis CLI, and create a list with some work items in it.

# redis-cli -h redis
redis:6379> rpush job2 "apple"
(integer) 1
redis:6379> rpush job2 "banana"
(integer) 2
redis:6379> rpush job2 "cherry"
(integer) 3
redis:6379> rpush job2 "date"
(integer) 4
redis:6379> rpush job2 "fig"
(integer) 5
redis:6379> rpush job2 "grape"
(integer) 6
redis:6379> rpush job2 "lemon"
(integer) 7
redis:6379> rpush job2 "melon"
(integer) 8
redis:6379> rpush job2 "orange"
(integer) 9
redis:6379> lrange job2 0 -1
1) "apple"
2) "banana"
3) "cherry"
4) "date"
5) "fig"
6) "grape"
7) "lemon"
8) "melon"
9) "orange"

So, the list with key job2 will be our work queue.

Note: if you do not have Kube DNS setup correctly, you may need to change the first step of the above block to redis-cli -h $REDIS_SERVICE_HOST.

Create an Image

Now we are ready to create an image that we will run.

We will use a python worker program with a redis client to read the messages from the message queue.

A simple Redis work queue client library is provided, called rediswq.py (Download).

The "worker" program in each Pod of the Job uses the work queue client library to get work. Here it is:

application/job/redis/worker.py

#!/usr/bin/env python

import time
import rediswq

host="redis"
# Uncomment next two lines if you do not have Kube-DNS working.
# import os
# host = os.getenv("REDIS_SERVICE_HOST")

q = rediswq.RedisWQ(name="job2", host=host)
print("Worker with sessionID: " +  q.sessionID())
print("Initial queue state: empty=" + str(q.empty()))
while not q.empty():
  item = q.lease(lease_secs=10, block=True, timeout=2) 
  if item is not None:
    itemstr = item.decode("utf-8")
    print("Working on " + itemstr)
    time.sleep(10) # Put your actual work here instead of sleep.
    q.complete(item)
  else:
    print("Waiting for work")
print("Queue empty, exiting")

You could also download worker.py, rediswq.py, and Dockerfile files, then build the image:

docker build -t job-wq-2 .

Push the image

For the Docker Hub, tag your app image with your username and push to the Hub with the below commands. Replace <username> with your Hub username.

docker tag job-wq-2 <username>/job-wq-2
docker push <username>/job-wq-2

You need to push to a public repository or configure your cluster to be able to access your private repository.

If you are using Google Container Registry, tag your app image with your project ID, and push to GCR. Replace <project> with your project ID.

docker tag job-wq-2 gcr.io/<project>/job-wq-2
gcloud docker -- push gcr.io/<project>/job-wq-2

Defining a Job

Here is the job definition:

application/job/redis/job.yaml

apiVersion: batch/v1
kind: Job
metadata:
  name: job-wq-2
spec:
  parallelism: 2
  template:
    metadata:
      name: job-wq-2
    spec:
      containers:
      - name: c
        image: gcr.io/myproject/job-wq-2
      restartPolicy: OnFailure

Be sure to edit the job template to change gcr.io/myproject to your own path.

In this example, each pod works on several items from the queue and then exits when there are no more items. Since the workers themselves detect when the workqueue is empty, and the Job controller does not know about the workqueue, it relies on the workers to signal when they are done working. The workers signal that the queue is empty by exiting with success. So, as soon as any worker exits with success, the controller knows the work is done, and the Pods will exit soon. So, we set the completion count of the Job to 1. The job controller will wait for the other pods to complete too.

Running the Job

So, now run the Job:

kubectl apply -f ./job.yaml

Now wait a bit, then check on the job.

kubectl describe jobs/job-wq-2
Name:             job-wq-2
Namespace:        default
Selector:         controller-uid=b1c7e4e3-92e1-11e7-b85e-fa163ee3c11f
Labels:           controller-uid=b1c7e4e3-92e1-11e7-b85e-fa163ee3c11f
                  job-name=job-wq-2
Annotations:      <none>
Parallelism:      2
Completions:      <unset>
Start Time:       Mon, 11 Jan 2016 17:07:59 -0800
Pods Statuses:    1 Running / 0 Succeeded / 0 Failed
Pod Template:
  Labels:       controller-uid=b1c7e4e3-92e1-11e7-b85e-fa163ee3c11f
                job-name=job-wq-2
  Containers:
   c:
    Image:              gcr.io/exampleproject/job-wq-2
    Port:
    Environment:        <none>
    Mounts:             <none>
  Volumes:              <none>
Events:
  FirstSeen    LastSeen    Count    From            SubobjectPath    Type        Reason            Message
  ---------    --------    -----    ----            -------------    --------    ------            -------
  33s          33s         1        {job-controller }                Normal      SuccessfulCreate  Created pod: job-wq-2-lglf8


kubectl logs pods/job-wq-2-7r7b2
Worker with sessionID: bbd72d0a-9e5c-4dd6-abf6-416cc267991f
Initial queue state: empty=False
Working on banana
Working on date
Working on lemon

As you can see, one of our pods worked on several work units.

Alternatives

If running a queue service or modifying your containers to use a work queue is inconvenient, you may want to consider one of the other job patterns.

If you have a continuous stream of background processing work to run, then consider running your background workers with a ReplicaSet instead, and consider running a background processing library such as https://github.com/resque/resque.

4 - Indexed Job for Parallel Processing with Static Work Assignment

In this example, you will run a Kubernetes Job that uses multiple parallel worker processes. Each worker is a different container running in its own Pod. The Pods have an index number that the control plane sets automatically, which allows each Pod to identify which part of the overall task to work on.

The pod index is available in the annotation batch.kubernetes.io/job-completion-index as a string representing its decimal value. In order for the containerized task process to obtain this index, you can publish the value of the annotation using the downward API mechanism. For convenience, the control plane automatically sets the downward API to expose the index in the JOB_COMPLETION_INDEX environment variable.

Here is an overview of the steps in this example:

1. Define a Job manifest using indexed completion. The downward API allows you to pass the pod index annotation as an environment variable or file to the container.
2. Start an Indexed Job based on that manifest.

Before you begin

You should already be familiar with the basic, non-parallel, use of Job.

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

• Katacoda
• Play with Kubernetes

Choose an approach

To access the work item from the worker program, you have a few options:

1. Read the JOB_COMPLETION_INDEX environment variable. The Job controller automatically links this variable to the annotation containing the completion index.
2. Read a file that contains the completion index.
3. Assuming that you can't modify the program, you can wrap it with a script that reads the index using any of the methods above and converts it into something that the program can use as input.

For this example, imagine that you chose option 3 and you want to run the rev utility. This program accepts a file as an argument and prints its content reversed.

rev data.txt

You'll use the rev tool from the busybox container image.

As this is only an example, each Pod only does a tiny piece of work (reversing a short string). In a real workload you might, for example, create a Job that represents the task of producing 60 seconds of video based on scene data. Each work item in the video rendering Job would be to render a particular frame of that video clip. Indexed completion would mean that each Pod in the Job knows which frame to render and publish, by counting frames from the start of the clip.

Define an Indexed Job

Here is a sample Job manifest that uses Indexed completion mode:

application/job/indexed-job.yaml

apiVersion: batch/v1
kind: Job
metadata:
  name: 'indexed-job'
spec:
  completions: 5
  parallelism: 3
  completionMode: Indexed
  template:
    spec:
      restartPolicy: Never
      initContainers:
      - name: 'input'
        image: 'docker.io/library/bash'
        command:
        - "bash"
        - "-c"
        - |
          items=(foo bar baz qux xyz)
          echo ${items[$JOB_COMPLETION_INDEX]} > /input/data.txt          
        volumeMounts:
        - mountPath: /input
          name: input
      containers:
      - name: 'worker'
        image: 'docker.io/library/busybox'
        command:
        - "rev"
        - "/input/data.txt"
        volumeMounts:
        - mountPath: /input
          name: input
      volumes:
      - name: input
        emptyDir: {}

In the example above, you use the builtin JOB_COMPLETION_INDEX environment variable set by the Job controller for all containers. An init container maps the index to a static value and writes it to a file that is shared with the container running the worker through an emptyDir volume. Optionally, you can define your own environment variable through the downward API to publish the index to containers. You can also choose to load a list of values from a ConfigMap as an environment variable or file.

Alternatively, you can directly use the downward API to pass the annotation value as a volume file, like shown in the following example:

application/job/indexed-job-vol.yaml

apiVersion: batch/v1
kind: Job
metadata:
  name: 'indexed-job'
spec:
  completions: 5
  parallelism: 3
  completionMode: Indexed
  template:
    spec:
      restartPolicy: Never
      containers:
      - name: 'worker'
        image: 'docker.io/library/busybox'
        command:
        - "rev"
        - "/input/data.txt"
        volumeMounts:
        - mountPath: /input
          name: input
      volumes:
      - name: input
        downwardAPI:
          items:
          - path: "data.txt"
            fieldRef:
              fieldPath: metadata.annotations['batch.kubernetes.io/job-completion-index']

Running the Job

Now run the Job:

# This uses the first approach (relying on $JOB_COMPLETION_INDEX)
kubectl apply -f https://kubernetes.io/examples/application/job/indexed-job.yaml

When you create this Job, the control plane creates a series of Pods, one for each index you specified. The value of .spec.parallelism determines how many can run at once whereas .spec.completions determines how many Pods the Job creates in total.

Because .spec.parallelism is less than .spec.completions, the control plane waits for some of the first Pods to complete before starting more of them.

Once you have created the Job, wait a moment then check on progress:

kubectl describe jobs/indexed-job

The output is similar to:

Name:              indexed-job
Namespace:         default
Selector:          controller-uid=bf865e04-0b67-483b-9a90-74cfc4c3e756
Labels:            controller-uid=bf865e04-0b67-483b-9a90-74cfc4c3e756
                   job-name=indexed-job
Annotations:       <none>
Parallelism:       3
Completions:       5
Start Time:        Thu, 11 Mar 2021 15:47:34 +0000
Pods Statuses:     2 Running / 3 Succeeded / 0 Failed
Completed Indexes: 0-2
Pod Template:
  Labels:  controller-uid=bf865e04-0b67-483b-9a90-74cfc4c3e756
           job-name=indexed-job
  Init Containers:
   input:
    Image:      docker.io/library/bash
    Port:       <none>
    Host Port:  <none>
    Command:
      bash
      -c
      items=(foo bar baz qux xyz)
      echo ${items[$JOB_COMPLETION_INDEX]} > /input/data.txt

    Environment:  <none>
    Mounts:
      /input from input (rw)
  Containers:
   worker:
    Image:      docker.io/library/busybox
    Port:       <none>
    Host Port:  <none>
    Command:
      rev
      /input/data.txt
    Environment:  <none>
    Mounts:
      /input from input (rw)
  Volumes:
   input:
    Type:       EmptyDir (a temporary directory that shares a pod's lifetime)
    Medium:
    SizeLimit:  <unset>
Events:
  Type    Reason            Age   From            Message
  ----    ------            ----  ----            -------
  Normal  SuccessfulCreate  4s    job-controller  Created pod: indexed-job-njkjj
  Normal  SuccessfulCreate  4s    job-controller  Created pod: indexed-job-9kd4h
  Normal  SuccessfulCreate  4s    job-controller  Created pod: indexed-job-qjwsz
  Normal  SuccessfulCreate  1s    job-controller  Created pod: indexed-job-fdhq5
  Normal  SuccessfulCreate  1s    job-controller  Created pod: indexed-job-ncslj

In this example, you run the Job with custom values for each index. You can inspect the output of one of the pods:

kubectl logs indexed-job-fdhq5 # Change this to match the name of a Pod from that Job

The output is similar to:

xuq

5 - Parallel Processing using Expansions

This task demonstrates running multiple Jobs based on a common template. You can use this approach to process batches of work in parallel.

For this example there are only three items: apple, banana, and cherry. The sample Jobs process each item by printing a string then pausing.

See using Jobs in real workloads to learn about how this pattern fits more realistic use cases.

Before you begin

You should be familiar with the basic, non-parallel, use of Job.

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

• Katacoda
• Play with Kubernetes

For basic templating you need the command-line utility sed.

To follow the advanced templating example, you need a working installation of Python, and the Jinja2 template library for Python.

Once you have Python set up, you can install Jinja2 by running:

pip install --user jinja2

Create Jobs based on a template

First, download the following template of a Job to a file called job-tmpl.yaml. Here's what you'll download:

application/job/job-tmpl.yaml

apiVersion: batch/v1
kind: Job
metadata:
  name: process-item-$ITEM
  labels:
    jobgroup: jobexample
spec:
  template:
    metadata:
      name: jobexample
      labels:
        jobgroup: jobexample
    spec:
      containers:
      - name: c
        image: busybox
        command: ["sh", "-c", "echo Processing item $ITEM && sleep 5"]
      restartPolicy: Never

# Use curl to download job-tmpl.yaml
curl -L -s -O https://k8s.io/examples/application/job/job-tmpl.yaml

The file you downloaded is not yet a valid Kubernetes manifest. Instead that template is a YAML representation of a Job object with some placeholders that need to be filled in before it can be used. The $ITEM syntax is not meaningful to Kubernetes.

Create manifests from the template

The following shell snippet uses sed to replace the string $ITEM with the loop variable, writing into a temporary directory named jobs. Run this now:

# Expand the template into multiple files, one for each item to be processed.
mkdir ./jobs
for i in apple banana cherry
do
  cat job-tmpl.yaml | sed "s/\$ITEM/$i/" > ./jobs/job-$i.yaml
done

Check if it worked:

ls jobs/

The output is similar to this:

job-apple.yaml
job-banana.yaml
job-cherry.yaml

You could use any type of template language (for example: Jinja2; ERB), or write a program to generate the Job manifests.

Create Jobs from the manifests

Next, create all the Jobs with one kubectl command:

kubectl create -f ./jobs

The output is similar to this:

job.batch/process-item-apple created
job.batch/process-item-banana created
job.batch/process-item-cherry created

Now, check on the jobs:

kubectl get jobs -l jobgroup=jobexample

The output is similar to this:

NAME                  COMPLETIONS   DURATION   AGE
process-item-apple    1/1           14s        22s
process-item-banana   1/1           12s        21s
process-item-cherry   1/1           12s        20s

Using the -l option to kubectl selects only the Jobs that are part of this group of jobs (there might be other unrelated jobs in the system).

You can check on the Pods as well using the same label selector:

kubectl get pods -l jobgroup=jobexample

The output is similar to:

NAME                        READY     STATUS      RESTARTS   AGE
process-item-apple-kixwv    0/1       Completed   0          4m
process-item-banana-wrsf7   0/1       Completed   0          4m
process-item-cherry-dnfu9   0/1       Completed   0          4m

We can use this single command to check on the output of all jobs at once:

kubectl logs -f -l jobgroup=jobexample

The output should be:

Processing item apple
Processing item banana
Processing item cherry

Clean up

# Remove the Jobs you created
# Your cluster automatically cleans up their Pods
kubectl delete job -l jobgroup=jobexample

Use advanced template parameters

In the first example, each instance of the template had one parameter, and that parameter was also used in the Job's name. However, names are restricted to contain only certain characters.

This slightly more complex example uses the Jinja template language to generate manifests and then objects from those manifests, with a multiple parameters for each Job.

For this part of the task, you are going to use a one-line Python script to convert the template to a set of manifests.

First, copy and paste the following template of a Job object, into a file called job.yaml.jinja2:

{% set params = [{ "name": "apple", "url": "http://dbpedia.org/resource/Apple", },
                  { "name": "banana", "url": "http://dbpedia.org/resource/Banana", },
                  { "name": "cherry", "url": "http://dbpedia.org/resource/Cherry" }]
%}
{% for p in params %}
{% set name = p["name"] %}
{% set url = p["url"] %}
---
apiVersion: batch/v1
kind: Job
metadata:
  name: jobexample-{{ name }}
  labels:
    jobgroup: jobexample
spec:
  template:
    metadata:
      name: jobexample
      labels:
        jobgroup: jobexample
    spec:
      containers:
      - name: c
        image: busybox
        command: ["sh", "-c", "echo Processing URL {{ url }} && sleep 5"]
      restartPolicy: Never
{% endfor %}

The above template defines two parameters for each Job object using a list of python dicts (lines 1-4). A for loop emits one Job manifest for each set of parameters (remaining lines).

This example relies on a feature of YAML. One YAML file can contain multiple documents (Kubernetes manifests, in this case), separated by --- on a line by itself. You can pipe the output directly to kubectl to create the Jobs.

Next, use this one-line Python program to expand the template:

alias render_template='python -c "from jinja2 import Template; import sys; print(Template(sys.stdin.read()).render());"'

Use render_template to convert the parameters and template into a single YAML file containing Kubernetes manifests:

# This requires the alias you defined earlier
cat job.yaml.jinja2 | render_template > jobs.yaml

You can view jobs.yaml to verify that the render_template script worked correctly.

Once you are happy that render_template is working how you intend, you can pipe its output into kubectl:

cat job.yaml.jinja2 | render_template | kubectl apply -f -

Kubernetes accepts and runs the Jobs you created.

Clean up

# Remove the Jobs you created
# Your cluster automatically cleans up their Pods
kubectl delete job -l jobgroup=jobexample

Using Jobs in real workloads

In a real use case, each Job performs some substantial computation, such as rendering a frame of a movie, or processing a range of rows in a database. If you were rendering a movie you would set $ITEM to the frame number. If you were processing rows from a database table, you would set $ITEM to represent the range of database rows to process.

In the task, you ran a command to collect the output from Pods by fetching their logs. In a real use case, each Pod for a Job writes its output to durable storage before completing. You can use a PersistentVolume for each Job, or an external storage service. For example, if you are rendering frames for a movie, use HTTP to PUT the rendered frame data to a URL, using a different URL for each frame.

Labels on Jobs and Pods

After you create a Job, Kubernetes automatically adds additional labels that distinguish one Job's pods from another Job's pods.

In this example, each Job and its Pod template have a label: jobgroup=jobexample.

Kubernetes itself pays no attention to labels named jobgroup. Setting a label for all the Jobs you create from a template makes it convenient to operate on all those Jobs at once. In the first example you used a template to create several Jobs. The template ensures that each Pod also gets the same label, so you can check on all Pods for these templated Jobs with a single command.

Alternatives

If you plan to create a large number of Job objects, you may find that:

• Even using labels, managing so many Jobs is cumbersome.
• If you create many Jobs in a batch, you might place high load on the Kubernetes control plane. Alternatively, the Kubernetes API server could rate limit you, temporarily rejecting your requests with a 429 status.
• You are limited by a resource quota on Jobs: the API server permanently rejects some of your requests when you create a great deal of work in one batch.

There are other job patterns that you can use to process large amounts of work without creating very many Job objects.

You could also consider writing your own controller to manage Job objects automatically.